Our Mic Cupboard

European Clients

www.advancedaudio-europe.com Advanced Audio Microphones Europe take care of ALL European sales and warranty. info@advancedaudio-europe.com

Shipping

Due to the boutique nature of our microphones, each one spends some time on the bench. We strive to ship within 72 hours of an order being placed.Questions? info@advancedaudio.ca

CM251 $995.00 USD

Advanced Audio CM251

Summary
The Advanced Audio CM251 is a large-format condenser tube microphone based on the famous ELA M251. Like the original ELA M251 it is an outstanding choice for vocals. Historically, the original was used on countless hit records and recordings, including Joni Mitchell and Sade'.   Legendary producer Jack Douglas loved the CM251 so much he bought a 2nd one from us.  Advanced Audio’s CM251 emulates the smooth and present character of the original, while staying true to our own circuit designs by not simply designing a clone but improving the original circuit specifications.

Capsule
The CM251 features Advanced Audio’s own AK12 capsule, an edge-fed, 34mm dual diaphragm capsule skinned with 6 micron German mylar that has a frequency response matching within ±1.5dB the response of the AKG CK12 capsule. The capsules are hand-picked and tested in our shop to insure both sides are within 2pfd of each other.

Circuit
The CM251’s circuit has been designed around the 6072a dual triode, hand selected, tube. The unused half of the 6072a is incorporated as a direct coupled, cathode follower, resulting in a much lower output impedance than that of the original circuit. This lower output impedance improves the damping factor, low frequency distortion and transient response plus allows the use of a transformer with half the turns-ratio of the original ELA M251. The result is a circuit with more headroom than the original plate fed circuit with a better low frequency and signal to noise ratio. The open top end sound of the mic is smoothed out by rolling off the top end above 10khz about 3db like the original ELA M251 circuit. 

Output
The CM251 utilizes a very HiFi BV18 dual-bobbin output transformer, it is easily driven by the optimized low-impedance 6027a circuit, yielding 3db more output level than the original transformers used in the AKG C12 and ELAM 251. This allows the head amp gain to be further reduced, increasing the total headroom (output level before distortion) by 6db and increasing the signal to noise ratio which reduces the microphone's (self noise).

.
The BV18 transformer is driven through a 2.2-ufd mylar capacitor to take advantage of the ability of both capsule and transformer to respond to frequencies reaching down below 20Hz. The transformer can deliver > +14dBu with < 1% distortion.

Tech Specifications:


Pattern Selection: 9 patterns switched for the power supply.
Circuit type: Class "A" 2 stage CCDA tube circuit, transformer coupled
Capsule: 34mm dual back-plate, edge fed, 6-micron mylar skinned diaphragms

Capsule Polarization: 60V in Cardiod to back-plate

Tube type: socketed 9 pin, selected 6072a dual triode
Transformer:BV18 dual bobbin custom 8:1 ratio with bi-metal laminations.
Transformer Distortion: <1%@20Hz/+10dBu and <0.05%@50Hz/+10dBu
Max SPL: 128dB 
Frequency response: 25Hz-20kHz + or - 3db
Equivalent Noise Level: <14dB (A- weighted)
S/N Ratio: >85dB (Ref. 1Pa A-weighted)
Sensitivity: -32dBu
Output impedance <200 ohm (load impedance <1.2K)
Output connector: Male XLR, 7-pin gold plated
Body DM: 
Microphone weight:
Total weight:


• Robust shock mount
• Aluminum road case
• 25’ 7 gold pin cable


Customer Reviews

Based on 3 reviews Write a review

You Might Also Like