Our Mic Cupboard

European Clients

www.advancedaudio-europe.com Advanced Audio Microphones Europe take care of ALL European sales and warranty. info@advancedaudio-europe.com

Shipping

Due to the boutique nature of our microphones, each one spends some time on the bench. We strive to ship within 72 hours of an order being placed.Questions? info@advancedaudio.ca

CM28 $595.00 USD

Advanced Audio CM28

 

The Advanced Audio CM28 is a pencil microphone with a unique hybrid topology. The CM28 offers the warmth of a tube circuit combined with the detail of the Class A discrete circuits used in German condenser microphones from the 1970s. The smooth, detailed response of the CM28 makes it an excellent choice for acoustic instruments. It can also be used in high-SPL situations such as the recording of percussion.

Pheonix Drive perform featuring the CM28 on acoustic. Take note of the other "stars" in the video, recorded at The West Barn in Nashville.

 

Capsule

Each CM28 microphone is supplied with cardiod, hyper-cardioid, and omni- directional capsules. A wide-cardioid capsule is available for an additional $59.

 

The head grill threads off to reveal a capsule similar to those used in the venerable Neumann KM84. These capsules have been designed with no grating and an extremely low rim recess in order to minimize audio reflections close to the diaphragm. The mesh head grill provides protection to the capsule that the KM84 lacked, while minimizing reflections.

 

Circuit

The fet front end is designed to preserve all the detail captured by the 19.5mm capsule. The signal is then delivered to a 6J1b tube circuit. This sub-miniature pentode is configured as a triode to drive the BV11 transformer, an approach that takes full advantage of the low-noise characteristic of the fet circuit as well as its very fast transient response.

 

The tube provides the fet with a very high impedance load so the fet's headroom is maximized. The tube circuit does not need to provide any gain, so its output impedance is very low. The lower output impedance and higher output swing of the tube circuit over the fet provides greater transparency.  The tube output circuit in the CM28 can provide 6dB more headroom than the Class A transformer-coupled fet-only circuits used in the 70s German condensers.

 

The CM28 has a -15dB external pad for high-SPL situations, and a low-frequency switch that rolls the low end out 6dB/octave at 80hz.

A remote power supply is provided that activates the tube and the fet.

 

Specification:

 

·    19.5mm, low profile externally-polarized condenser capsule

·    Omni, Cardioid, Wide-cardiod and Hyper-cardiod pickup patterns

·    Circuit: Class A fet/tube hybrid

 

·    Frequency Response: 20Hz to 20kHz (response relates to pattern type)

·    Impedance: 200 ohms.

·    Max SPL: 120 dB/135dB with -15dB pad.

·    Distortion: < 1% THD @ 1KHz) 120dB, or at 135dB w/-15dB pad

·    Equivalent Noise: 18dB (A-weighted)

·    Sensitivity: 14MV/Pa = -37dB (0dB = 1v/Pa) -10dB

·    Pad: -15dB (Via Switch)

·    Filter: HPF @ 80Hz (Via Switch)

·    Weight: 4.2 oz (119 g.)

·    Size: 5 1/2" (140mm) length x 13/16" (21mm) diameter

 

·    Robust shock mount

·    Power Supply: 120/220VAC, 7-pin Neutrik supplying 6VDC & 125VDC

·    7-Pin Microphone cable

·    Aluminum Road case

 

 

Click here for response curves.

 

You may also wish to add the upgraded shock mount(Z3-28) to your order for an additional $55.

You Might Also Like