CM47VE $895.00 USD

NOTE: WE JUST SOLD OUT OF THE CM47 AND THERE IS A PRE-SALE PRICE IN PLACE UNTIL MORE ARRIVE IN 6-8 WEEKS. 

CM47ve

The Advanced Audio CM47ve is a large dual-diaphragm, multi-pattern, tube condenser microphone inspired by the famous Neumann U-47. The CM47ve is a great choice for vocals, horns, acoustic instruments, and excels in front of bass and guitar amps. The CM47ve provides response within +or - 1.5dB of a U47 microphone made after 1958.

Dan Wilson using the CM47ve on acoustic guitar.

Capsule:

The Advanced Audio CM47ve features our AK47 capsule. The AK47 is an exact reproduction of the early Neumann K47. The AK47 is a 32mm capsule with single back-plate, random drill pattern and is skinned with 6 micron mylar and a brass surround like the 1959 k47. The CM47ve yields a more vintage, 'darker' response curve than our CM47 above 10kHz but has a very present sound with a slightly wider proximity effect than the CM47.

 

Circuit:

The circuit is based on the very hifi 6072 tube optimized with a state of the art two-stage Class "A" CCDA design.

This circuit provides a much lower output impedance with more headroom than the circuit used in the original U47. The lower output impedance provides a faster damping factor when driving the BV8 type transformer, delivering a better transient response than the original design.

 Selected 6072a tubes are some of the quietest tubes made, and are much less susceptible to microphonics than the metal-clad vf14 tubes used in the original U47 tube microphone.

The dual-bobbin output transformer with its hum bucking configuration and our optimized circuit will deliver > +14dBu with less than 1% distortion.

The output transformer is driven with a 2.2 ufd metal-film capacitor to take advantage of the transformer’s response down below 20Hz.

Specifications:

•  1.0” (32mm) Ak47 single back plate, 6-micron skinned mylar capsule
• Capsule polarization 60v on the back-plate
• 9 selectable pickup patterns remotely switched from the power supply
• Dual bobbin BV8 (6.5:1 ratio) output transformer
• Selected 6072a tube Class A dual stage (CCDA)
• Frequency response: 20Hz to 20kHz +/–3dB

• Noise: <15dB (A-weighted)
• Impedance: < 200 ohm (load impedance <1.2K)
• Distortion: < 0.5% @128dB
• Maximum Output: > +14dBu with less than 1% distortion
• Robust shock mount that threads onto microphone body
• Flight case.   

Click here for the response curves.